何刚德《抚郡农产考略》农业经济思想初探

《抚郡农产考略》是清末江西有代表性的农学著作,不仅保存有抚州地区大量农产种类、栽培与加工技术等资料,还包含了大量的商品经济信息。作者何刚德已经认识到自给自足的自然经济会对生产有束缚作用,他在记载各类农产品时,提出“价值”的概念且用货币价格对其衡量,并深入揭示了农产品上市时间、供求、地理、交通条件等因素对价格的影响,进而寻求增值之道。何氏提倡多种经营,大力种植棉花、烟叶等经济作物,发挥柑橘、甘蔗等名优特产优势,促进农业的商品化生产。他还建议通过深加工的方式获取更高利润,并对未能引进西方的先进加工技术而感到惋惜。《抚郡农产考略》体现了中国近代官僚知识分子对农业经济转型的探索,具有重要的历史价值与现实意义。     

水流冲击多段滞留气团的三维数值模拟

针对水气两相瞬变现象,充分考虑了水体弹性、气体可压缩性、水-气交界面的动态运动以及多段气团间相互作用,采用三维CFD方法对起伏管道内含多段滞留气团的水气两相作用进行建模和模拟,选择Standard k-ε湍流模型进行模拟研究,将三维计算结果、现有一维模型计算结果与试验结果进行对比分析,并通过水气两相分布图展现动态变化过程.结果表明:与一维模型相比,三维CFD模型能够更为准确地模拟起伏管道内瞬变压力波动,并且能够清楚描述水气掺混、耦合的动态变化.水流冲击初始两段滞留气团压力波动曲线显示,多气团间的瞬变压力并非同步变化,可能呈现多气团峰值压力交替出现的情况,这与初始气团长度密切相关.水气交界面自由变化,阻断水体长度时刻发生变化,当水体运动到管道弯曲处时会产生新的阻断水体,将气团分成若干部分.     

蜗壳式离心泵外特性仿真与实验研究

为探索不同仿真方法的适用性,对ns=157的单级蜗壳离心泵不同工况的扬程和效率进行定常和非定常计算,并分别分析了定常计算时不同叶片夹角及非定常计算时不同时间步长的影响,通过与实验对比,得到的主要结论有:定常计算仅适用于额定工况外特性仿真,其扬程和效率计算误差分别为4.9%和2.9%,而定常多相位的计算误差分别为7.1%和3.2%;非定常仿真计算时,以4°为时间步长,并间隔20°保存一次计算数据,较好地预测出扬程曲线走势,额定工况扬程和效率计算误差约1.1%和1.8%,但小流量和大流量区间扬程计算误差达到10%左右。因此在水力优化设计时,若只关注高效点位置及其扬程和效率,可采用定常计算,若还关注扬程曲线走势,则应采用非定常计算。     

基于有限元的汽车扭臂热锻工艺研究

文章以汽车扭杆力臂为研究对象,通过DEFORM-3D有限元分析对汽车扭杆力臂热锻工艺过程进行模拟试验,分析了成形过程中的上模载荷情况、应力应变场分布情况和温度场的变化规律。以提高产品质量和降低载荷为主要目的,给出合理的热加工参数,分析结果能为类似锻件的热模锻工艺和模具设计提供依据。     

数值模型结构不确定性对模拟结果的影响分析

以内蒙古鄂托克旗为例,基于GMS中的MODFLOW模块构建了地下水流数值模拟模型,分析了模型结构(含水层厚度、参数分区)与模型参数不确定性因素对模拟结果的影响.研究结果表明:含水层不确定情景(含水层下边界概化为隔水底板平均值870 m)与实际情况水头差值绝对值的累计和最大为701 m,对模拟结果起了主控作用;当含水层下边界概化为910,940 m时,累计和分别增加为1 013,1 593 m;与仅考虑单个不确定性因素相比,同时考虑模型参数与含水层不确定情景累计和最大为738 m,同时考虑参数分区与含水层不确定情景累计和最大为791 m.因此,在构建地下水流数值模拟模型时,应优先考虑含水层空间结构概化的合理程度,同时考虑多个不确定性因素对模拟结果的综合影响,使地下水数值模拟模型能更精确地反映真实的地下水流状况.     

Hybrid breeding for biomass yield in winter triticale: II. Combining ability and hybrid prediction

Accurate hybrid prediction and knowledge about the relative contribution of general (GCA) and specific combining ability (SCA) are of utmost importance for efficient hybrid breeding. We therefore evaluated 91 triticale single-cross hybrids in field trials at seven environments for plant height, heading time, fresh biomass, dry matter content and dry biomass. Fresh and dry biomass showed the highest proportion (23%) of variance due to SCA. Prediction accuracies based on GCA were slightly higher than based on mid-parent values. Utilizing parental kinship information yielded the highest prediction accuracies when both parental lines have been tested in other hybrid combinations, but still moderate-to-low prediction accuracies for two untested parents. Thus, hybrid prediction for biomass traits in triticale is currently promising based on mid-parent values as emphasized by our simulation study, but can be expected to shift to GCA-based prediction with an increasing importance of GCA due to selection in hybrid breeding. Moreover, the performance of potential hybrids between newly developed lines can be predicted with moderate accuracy using genomic relationship information.     

Replacement of fish oil in plant‐based diets for Pacific white shrimp,Litopenaeus vannamei,by stearine fish oil and palm oil

Stearine fish oil (SFO) and palm oil (PO) have emerged as promising alternatives for the replacement of fish oil (FO) in aquafeeds. This study evaluated the replacement of FO with alternative oils in practical diets for Litopenaeus vannamei. In a clear brackish water study (14.1 g/L) utilizing shrimp (0.29 ± 0.02 g, initial weight), FO was replaced by SFO at inclusion ratios of 100:0, 75:25, 50:50, 25:75, and 0:100 (FO:SFO) and PO as 90% of FO. After 55 days, no significant differences (p < 0.05) in final weight, growth, or survival of shrimp were observed. A second trial (8 weeks) in low‐salinity water (2.1 g/L) with shrimp (0.92 ± 0.02 g, initial weight) evaluated diets with 100% FO, 100% SFO, 90% PO, 90% soybean oil (SO), or 90% flaxseed oil (FXO) as a replacement for FO and four commercially produced diets with 2% of FO, SO, PO, or FXO. One treatment received half rations of the commercial FO diet, and one treatment was based entirely on natural productivity. Results show that the fatty acid profiles of the tail muscle conformed to the lipids of the feed, and highly unsaturated fatty acids (HUFAs) were preserved. Following 8 weeks of culture, there were no significant differences in production performance.     

拖拉机室内台架试验技术现状与展望

作为拖拉机研发的重要验证手段，拖拉机室内台架试验可方便高效地为拖拉机模拟各种工况下的性能表现。首先探究动力总成控制技术、负载模拟技术、试验数据处理技术和试验结果评价技术4种拖拉机室内台架试验关键技术，结合试验技术的最新研究进展，对4种技术进行详细的阐述和分析。接着从动力总成控制算法、负载模拟算法、试验数据处理方法、试验结果评价指标体系4个方面对拖拉机室内台架试验技术进行讨论与展望。最后得出对动力总成算法进行优化、提高动态负载模拟精度、保持试验数据处理方法的前沿性、对试验结果综合客观评价是拖拉机室内台架试验技术的发展趋势，以期为我国拖拉机室内台架试验技术的发展提供参考。     

基于玻璃化转变的稻谷变温热风干燥工艺研究

为保证稻谷干燥后品质、提高干燥效率,基于不同含水率稻谷的玻璃化转变温度,提出变温热风干燥工艺。采用三因素五水平中心组合试验方法,以稻谷温度、初始含水率和热风风速为影响因素,以稻谷爆腰指数、整精米率和干燥时间为评价指标,研究稻谷玻璃化转变温度、恒温和变温干燥特性,模拟解析稻谷干燥过程中传热传质规律,以5、10、15℃的变温幅度进行变温干燥试验。结果表明,稻谷玻璃化转变温度与其含水率呈负相关,恒温干燥最佳工艺参数为稻谷温度47℃、初始含水率22.0%、热风风速0.50 m/s,干燥后稻谷爆腰指数70、整精米率57.67%、干燥时间195 min;与恒温干燥相比,以5℃和10℃为变温幅度的变温干燥工艺,干燥后稻谷爆腰指数分别降低了20和10,整精米率提高12.6、7.7个百分点,干燥时间缩短30 min和60 min。研究表明,基于玻璃化转变的稻谷变温热风干燥工艺明显改善了稻谷干燥后品质,提高了干燥效率。     

Introduction to the International Symposium on Lipid Science and Health and research progress in lipid science and health

The International Symposium on Lipid Science and Health (ISLSH), which was organized annually by Oil Crops Research Institute of Chinese Academy of Agricultural Sciences (OCRI-CAAS) since 2016, has gained a strong reputation and attracted hundreds of delegates from around the world for discussion of lipid research trends and advances every year, to promote research and academic exchanges in the fields of lipid science and health. The 5th International Symposium on lipid Science and Health was successfully held in Wuhan, China, from October 23rd to 25th, 2020, to celebrate the 60th anniversary of OCRI-CAAS. The two-day symposium gathered well-known experts specialized in lipid science to share the current state of lipid research with emphasis on aspects covering: (1) lipid profiling and characterization, (2) lipid preparation and modification, (3) lipid improvement and regulation, and (4) lipid nutrition and health. The symposium was conducted by a combination of on-site and network meeting. More than 250 distinguished delegates from academia and industry participated in the on-site multidisciplinary meeting, and thousands of scholars attended the virtual event. This paper is as a record of the symposium proceedings and a brief summary of the advances and trends in 4 aspects of lipid science and health.